Inorganic Chemistry Notes by Resonance for JEE Main and Advance

Inorganic chemistry Notes by Resonance for JEE Main and Advance

Inorganic Chemistry Chapters are the major chapters in JEE as you can get maximum questions from these in JEE. The JEE aspirants should read Resonance Chemistry Inorganic Handwritten notes as they can get important questions for the exams from these.

After 12th, IIT, JEE Main, and Advanced are some important entrance examinations for engineering aspirants. Therefore, students search different coaching materials for better preparation. In this content, students can get the IIT JEE toppers handwritten notes pdf for exam preparation.

Inorganic chemistry Hand written Notes by Resonance for NEET provides detailed course on Important Inorganic Chemistry atomic structure. So, dear aspirants read Resonance Inorganic Chemistry topics and share with your friends.

Contents of Notes 1:
1. Basic inorganic Chemistry
2. Qualitative Analysis
3. Quantum Numbers
4. Periodic Table
5. Chemical Bonding

Inorganic chemistry Hand written Notes by Resonance Buy Here

Content for Notes 2:
Chemical Bonding
Nitrogen and Oxygen Family
s Block
Coordination Compounds
B-C Family
Halogen and Noble Gases
Nomenclature of Inorg Comp

Inorganic chemistry Hand written Notes by Resonance Buy Here

Contents of Notes 3:
Grignard Reagent
Aromatic Compounds
Carbonyl Compounds
Bio-molecules, Amino acids and Polymers
Acids and acid Derivatives
Alkane, alkenes, alkynes
POC and structural identifications
RX mechanism

Inorganic chemistry Hand written Notes by Resonance

Chapterwise Vedantu Chemistry JEE modules 2021, Free Download

Bansal Complete Chemistry Module FREE DOWNLOAD

Download Bansal Classes Mock test series Pdf for JEE MAIN

The chapter names of chemistry (11th & 12th)

Inorganic chemistry chapters :


  1. Classification of Element and Periodicity
  2. Hydrogen
  3. s- block Elements
  4. p- block Elements
  5. Environmental Chemistry


  1. p- block Element
  2. d- and f- block Elements (Transitions Elements)
  3. General Principle and Process of Isolation of Elements
  4. Co-ordination Compound

physical chemistry chapters :


  1. Some Basic Concept of Chemistry
  2. State of Matter
  3. Structure of Atom
  4. Chemical Bonding and Molecular Structure
  5. Chemical Thermodynamics
  6. Equilibrium
  7. Redox Reaction


  1. Solid State
  2. Solutions
  3. Electrochemistry
  4. Chemical Kinetics
  5. Surface Chemistry

organic chemistry chapters :


  1. General Organic Chemistry
  2. Hydrocarbons


  1. Organic Compounds Containing Halogen
  2. Alcohol, Phenol & Ether
  3. Aldehydes, Ketones and Carboxylic Acid
  4. Organic Compound Containing Nitrogen (Amines)
  5. Polymers
  6. Biolmolecules
  7. Chemistry in Everyday Life

In JEE Main and JEE Advanced Examination, Basic Concepts of Chemistry chapter is an important one. The Experts have prepared the chapter notes of Basic Concepts of Chemistry with important concepts, formulae and some more solved questions for better doubt clearing of the concepts. The aspirants can revise these notes before the examination.

Here are the following topics:

  • Mole,
  • Avogadro’s number,
  • Law of conservation of mass,
  • Law of definite proportion,
  • Law of multiple proportions,
  • Law of gaseous volume,
  • Average atomic mass,
  • Molecular mass,
  • Empirical formula,
  • Molecular formula,
  • Mass percentage,
  • Mole fraction,
  • Molarity,
  • Molality and
  • Normality

General Organic Chemistry:

Bond Fission:

a) Homolytic fission:  Each atom separates with one electron, leading to the formation of highly reactive entities called radicals, owing their reactivity to their unpaired electron.

b) Heterolytic fission: One atom holds on to electrons, leaving none for the other, the result in the above case being a negative and positive ion, respectivelythe result   being the formation of an ion pair.

Reactions involving radicals tend to occur in the gas phase and in solution in non-polar solvents, and to be catalyzed by light and by the addition of other radicals.  Reactions involving ionic intermediates take place more readily in solution in polar solvents, because of the greater ease of separation of charges therein and very often because of the stabilization of the resultant ion pairs through solvation.Homolytic and Heterolytic Bond Fision

Electronic Displacement in Covalent Bonds

The following four types of electronic effects operates in covalent bonds

a) Inductive effect

b) Mesomeric and Resonance effect

c) Electromeric effects

d) Hyperconjugation

Inductive Effect:

a) Negative inductive Effect: (–I Effect):This is due to electron – attracting groups (X); it develops positive charge on the chain and is said to exert a negative inductive denoted by (– I)
1) It decreases as one goes away from group X (electron attracting):  X-C1-C2-C3

C1(d+) > C2(dd+) > C3(ddd+) and after third carbon charge is negligible

D and L configuration:

a) The configuration of an enantiomer is related to a standard, glyceraldehydes.

Order:  +NH3NO2 > F > COOH > Cl > Br > I > OH > C6H5
a) Positive Inductive Effect (+I): This is due to electron-releasing group (Y). It develops an negative charge on the chain and is said to exert a positive inductive effect denoted by (+I)  

1) It also decreases as we go away group Y (electron – releasing):Y-C1-C2-C3

C1(d–) > C2(dd–) > C3(ddd–)

2) Order: (CH3)C -R > (CH3)2CH-R > CH3CH2-R > CH3-R

 (–I) effect(+I) Effect
Acidic nature –IncreasesDecreases
Basic nature–DecreasesIncreases

Mesomeric Effect or Resonance Effect:

 In conjugated systems, p-electrons shifting takes place consecutively giving permanent polarity on the chain.  

a) Positive Mesomeric Effect (+M):  A group or atom is said to have +M effect when
the direction of electron -displacement is away from it.
+M effect

This effect extends the degree of delocalization and imparts stability to the molecule
Delocalization of Electrons in Aniline
Delocalization of Electrons in Phenol

a) Negative Mesomeric Effect (–M): A group or atom is said to have +M effect when the direction of electron -displacement is toward it.

Examples of –M effect

a) Resonance Energy: The difference in energy between the hybrid and the most stable canonical structure is  called as Resonance energy

Resonance Energy of Benzene

Electromeric Effect: 

Complete transfer of p-electrons from one atom to other to produce temporary polarity on atoms joined by multiple bonds, in the presence of an electrophile is known as electromeric effect. Effect is reversible and temporary.

a)  Positive Electromeric Effect:

p-electrons transfer takes place C to C (as alkenes, alkynes etc.)

a) Negative Electromeric Effect:

p-electrons transfer takes place to more electronegative atom (O,N,S) joined by multiple bonds.


Delocalization of sigma electrons also known as sigma-pi – conjugation or no bond resonance.
It is a permanent effect.

a) Occurrence
Alkene, alkynes
Free radicals (saturated type)  carbonium ions (saturated type) 

b) Condition
Presence of a–H with respect to double bond, triple bond carbon containing positive charge (in carbonium ion) or unpaired electron (in free radicals) 


Hyperconjugation in Propene Molecule

Note: Number of hyperconjugative structures = number of a-Hydrogen. Hence, in above examples structures I,ii,iii,iv are hyperconjugate structures (H-structures).

a)  Effects of Hyperconjugation:

Bond Length: Hyperconjugation also affects bond lengths because during the process the single bond in compound acquires some double bond character and vice-versa

Dipole moment: Since hyperconjugation causes this development of charges, it also affects the dipole moment of the molecule.

Stability of carbonium Ions: Tertiary > Secondary > Primary

Stability of Free radicals: 

Reactive Intermediates:

 Species Geometry Stability
  Carbocation sp2 hybridized with a planar structure and bond angles are of about 120°. There is a vacant unhybridized p orbital which (e.g. in the case of CH3+) lies perpendicular to the plane of C—H bondsAny structural feature which tends to reduce the electron deficiency at the tricoordinate carbon stabilizes the carbocation Order: 3°> 2° > 1° > CH3+
 Carbanionssp3 hybridized with the unshared pair occupying one apex of the tetrahedron.Pyramidal structures similar to those of amines.Any structural feature which tends to reduce the electron deficiency at the tricoordinate carbon stabilizes the carbocationOrder: 3°< 2° < 1° < CH3 
Free Radicalssp2 hybridized  with planar (trigonal) structure..andsp3 hybridized  with pyramidal structure.Hyperconjugation increases the stability of free radical.Order: : 3°> 2° > 1°

Isomerism :

Structural Isomerism:

Chain IsomerismThis type of isomerism arises from the difference in the structure of carbon chain which forms the nucleus of the molecule.Butane and Isobutane
Position IsomerismIt is the type of isomerism in which the compounds possessing same molecular formula differ in their properties due to the difference in the position of either the functional group or the multiple bond or the branched chain attached to the main carbon chain.n-propyl alcohol and isopropyl alcohol
Functional IsomerismIn this type of isomerism two compounds have the same molecular formula but possess different functional groups.Diethyl ether(C2H5-O-C2H5) and butyl alcohol (C4H9OH)
MetamerismThis type of isomerism is due to the unequal distribution of carbon atoms on either side of the functional group in the molecule of compounds belonging to the same classFor example, methyl propyl ether and diethyl ether both have the molecular 
TautomerismIt is the type of isomerism in which two functional isomers exist together in equilibrium. The two forms existing in equilibrium are called as tautomers.Acetoacetic ester has two tautomers – one has a keto group and other has an enol group

Geometrical Isomerism:

The isomers possess the same structural formula containing a double bond and differ only in respect of the arrangement of atoms or groups about the double bond.

This isomerism is shown by alkenes or their derivatives in which two different atoms or groups are attached to each carbon containing the double bond.

Thus the compounds having the formula abC = Cxy or the simple structure abC = Cab occur in two forms and exhibit geometrical isomerism.

Geometrical isomerism in substuted alkenes
geometrical isomerism in alkenes

a)The trans isomers of alkenes are usually more stable than their corresponding cis isomers.

b) The trans isomers have normally less dipole moments than their corresponding cis isomers.

c) The trans isomer has greater symmetry than the corresponding cis isomer. Thus it packs more easily in the crystal lattice and hence has higher melting points.

Optical Isomerism:

a) Optical Activity: The property of a substance of rotating the plane of polarized light.

b) Specific Rotation: The number of degrees of rotation observed when light is passed through 1 decimeter (10 centimeters) of its solution having concentration 1 gram per milliliter. 

a) Laevorotatory or (-) – form:  rotates the plane of polarized light to the left.

b) Dextrorotatory or (+)- form : rotates the plane of polarized light to the right.

c) Racimic Mixture or (±)– mixture : An inactive from which does not rotate the plane of polarized light at all. This is a mixture of equal amounts of (+)– and (–)– forms and hence its optical inactivity

Asymmetric Carbon atom: A carbon atom which is attached to four different atoms


a) All organic compounds which contain an asymmetric carbon (C* abde) atom are chiral and exist in two tetrahedral forms.

b) A molecule must have chirality in order to show optical activity.

Enantiomers: Two optical isomers which are non superimposable mirror images of each other.
Non superiomposable mirror images

a) Meso compounds:  Compound containing two or more chiral carbon which do not show optical activity due to presence of centre of symmetry (indicated by thick dot).

b) Compounds which have unsymmetrical molecule with one or more chiral centres: In
such compounds if ’n’ is the number of chiral carbons, then

      No. of optically active isomers (a) = 2n

      No. of racemic forms (r) = a/2

      No. of meso forms (m) = 0

c)  compounds having a symmetrical molecule (compounds having chiral carbons but molecule as a whole is achiral): (a) compounds with even number of carbons atoms: In such compounds if number of chiral carbons in n, we have a  = 2n–1, r = a/2, and  m=2(n/2-1)

d) Compounds with odd number of carbon atoms: In such compounds if n is the number of asymmetric carbons then total optical isomers are given by 2n-1 whereas  m = 2(n-2)/2). Thus, a  = 2n–1 –2(n-1)/2).

Internal Compensation in Meso Tartaric Acid

The force of rotation due to one half of the molecule is balanced by the opposite and equal force due to the other half. The optical inactivity so produced is said to be due to internal compensation. It occurs whenever a compound containing two or more

Fischer Projections:

a) Representing three dimensional structures on a two dimensional surface.

b) Asymmetric carbon atom drawn in a prescribed orientation and then projected into a planar surface.

c) Planar formulas of the asymmetric carbon are obtained by placing it so that the two substituents are horizontal and project out towards the viewer (shown by thick wedge-like bonds), while the two other substituents are vertical and project away from the viewer (shown by dotted bonds).

Fischer Projection

D and L configuration:

a) The configuration of an enantiomer is related to a standard, glyceraldehydes.
D and L configuration of glyceraldehyde 

b) If the configuration at the asymmetric carbon atom of a compound can be related to D (+)-glyceraldehyde, it belongs to D-series.

c) By convention for sugars, the configuration of the highest numbered asymmetric carbon is referred to glyceraldehyde to determine the overall configuration of the molecule.

R and S System:

The sequence rules to determine the order of priorities of groups are :

The atoms or groups directly bonded to the asymmetric carbon are arranged in order of decreasing atomic number and assigned priority 1, 2, 3, 4, accordingly

a) Thus in chlorobromofluoromethane (CHClBrF), the substituents Br (at no = 35), Cl     (at no = 17), F (at no = 9) and H (at no = 1) give the order of priorities.

      Br    >   Cl    >    F    >    H

      (1)        (2)        (3)        (4)

b) When two or more groups have identical first atoms attached to asymmetric     carbon, the priority order is determined by considering the atomic numbers of the   second atoms; and if the second atoms are also identical the third atoms along    the chain are examined.

c). If the first atoms of the two groups have same substituents of higher atomic     number, the one with more substituents takes priority.

Thus ––CHCl2 has a higher priority than ––CHCl.

d) A doubly or triply bonded atom ‘A’ present in a group appended to asymmetric carbon, is considered equivalent to two or three singly bonded ‘A’s, respectivelyThus, R= A equals A-R-A.

 If in a molecule, order of priority for groups a,b,c,d, & e is  a > b > d > e

R and S System

Diastereomers :

  • Stereoisomers which are optically active isomers but not mirror images, are called  diasteriomers.
  • Diastereoisomers have different physical properties. Thus they have different melting points, boiling points, solubilities in a given solvent, densities, and refractive indices.
  • They also differ in specific rotations; they may have the same or opposite signs of rotations.
  • Like geometrical isomers, the diastereoisomers may be separated from each other :–
    • by fractional distillation due to their difference in boiling points;
    • by fractional crystallisation due to their difference in solubility;
    • by chromatography due to their different molecular shapes and polarity.

Disclaimer- does not own this book neither created nor scanned. We give the affiliate link to buy ebooks and study materials. We strongly recommend to buy these books and encourage the publisher to publish more such books.

Leave a Comment